Restoring the Appearance of Travertine Kitchen Tiles in Cirencester

This customer from Cirencester was not happy with her look of her Travertine floor tiles; in fact, she had been browsing the Tile Doctor web site and realised how her floor should look and got in touch to have it renovated.

Polished Travertine Cirencester Before Cleaning Polished Travertine Cirencester Before Cleaning

I’m based in Dursley which is West Gloucestershire and have made the journey to Cirencester to the East on several occasions to work on tiled floors there. If you have never been it’s worth a visit; it’s a lovely market town which dates back to Roman times and is situated on the lower slopes of the Cotswold Hills.

Burnishing a Travertine Tiled Floor

To get the best from Travertine it really needs to be burnished which is an abrasive cleaning process that involves the application of several different grades of diamond encrusted pad to the stone lubricated with a small amount of water.

The pads are fitted to a rotary buffer and run over each tile in sequence from coarse to very fine. I started with the first of the four burnishing pads which is a coarse 400 grit pad that designed to grind away the dirt and old sealer on the surface of the floor. After applying the first pad, I moved my way through the medium 800 and fine 1500 grit pads to gradually restore the appearance of the Travertine making sure to rinse the floor with water in between to remove the soiling.

Next, I set about cleaning grout lines with Tile Doctor Remove and Go which was diluted with water and then scrubbed in with a stiff narrow brush. The soiled cleaning solution was then rinsed off with more water and extracted using a wet vacuum.

Polished Travertine Cirencester During Polishing Polished Travertine Cirencester During Polishing

The burnishing and grout cleaning took most of the day and I need the floor to be dry in order to seal it so I left for the day and left the floor to dry off fully overnight.

Sealing a Travertine Tiled Floor

The next day and before sealing the floor I applied the last pad in the set of four which is a 3,000 grit “very fine” burnishing pad. This final pad really builds the final polish on Travertine tile. The pad is applied with the rotary buffer as before but is applied dry with only a fine spray of water using a process we call a “Spray Burnish”

Once I was happy with polish I proceeded to seal the floor using Tile Doctor Ultra Seal which is a natural look sealer the seeps into the pores of the stone protecting it from within but without affecting the look of the stone. The floor was then left to dry for an hour and I finished by giving the Travertine a final buff using a white pad.

Polished Travertine Cirencester After Polishing Polished Travertine Cirencester After Polishing

My customer was delighted and now she has a Travertine tiled floor looking how it should.
 
 

Professional Travertine Floor Polishing and Sealing in Gloucestershire

Dirty Grout Lines Refreshed on a Ceramic Tiled Hallway in Cirencester

Cirencester is a large market town in the East of Gloucestershire known for its rich history dating back to the Roman times, when it was known as Corinium. This area is also home to the Royal Agricultural University, the oldest agricultural college in the English-speaking world.

I visited the town recently to see a customer who was having significant problems with the cleaning of her Ceramic tiled hallway. Ceramic tiles are always a popular choice in high traffic areas like Hallways and Kitchens due to their durability, as well as water and scratch resistance. However, this floor had been installed a decade ago and during that time had not received adequate maintenance. Although the Ceramic tiles themselves had not faired too badly the grout lines were heavily ingrained with dirt, making them near impossible to clean with everyday cleaning products.

Ceramic Grout Lines Cirencester Before Cleaning

The property owner had tried numerous products without success and determined to get the grout clean again sought assistance from her local Tile Doctor. I deal with these types of issues all the time so I was happy to pop round and see what could be done to restore the floor back to its peak condition.

Cleaning a Dirty Ceramic Tiled Hallway

To begin, I set about cleaning the grout lines using a mixture of Tile Doctor Remove and Go, which is a multi-purpose stripper and degreaser that breaks down any old sealer, and Tile Doctor Pro-Clean, which is a strong alkaline-based cleaner suitable for all types of stone and tile. I applied the cleaning solution and left it to dwell for about 30 minutes, before using a grout brush to lift away a decade’s worth of grime and muck.

Next, I used Pro Clean again to scrub the tiles in combination with a black scrubbing pad fitted to a rotary machine, before rinsing the entire floor with fresh water to remove any traces of chemicals. Then, I dried the grout lines with a heat gun and left them to cool for about 10 minutes. The grout lines were subsequently ready to be sealed.

Sealing a Ceramic Tiled Hallway

With the floor ready to be sealed, I applied Tile Doctor Ultra-Seal to the grout lines using a pipette, which is a tool used to deliver a measured quantity of sealer.

Ultra-Seal is a premium sealer which is formulated to provide maximum stain protection. While leaving the grout with a natural look, the sealer will keep the grout looking fresh and free of ingrained dirt for some time to come.

Ceramic Grout Lines Cirencester After Cleaning

The customer was amazed at how quickly I could transform the condition of the grout. As you can see from the photo below, the condition of the grout really shapes the appearance of the floor – and now these Ceramic tiles are a real asset to the property once again.
 
 

Professional Cleaning of Dirty Ceramic Tile and Grout in a Gloucestershire Hallway

Restoring the Appearance of a Polished Limestone Tiled Floor in Cirencester

This customer was looking to rent out his property in the East Gloucestershire town of Cirencester, the largest in the Cotswold District. However, he found that many prospective tenants were put off by the condition of the Limestone floor tiles on the ground floor.

Limestone Bathroom Floor Before Cleaning Cirencester

Over the years, the sealer had worn away and that had allowed for dirt and stains to become ingrained in the pores of the stone, leaving the Limestone tiles looking very dull, unclean and generally undesirable. To boost his chance of finding a tenant for the property, the customer asked me to come in to restore the Limestone tiles to their best possible condition.

Limestone Kitchen Floor Before Cleaning Cirencester

I arrived at the property and conducted a survey to assess the situation. The customer – not wanting to waste any more time – asked if I could complete the restoration straight away, fortunately I was able to shuffle a few things around and was able to make a start two days later.

Limestone Floor Before Cleaning Cirencester

Burnishing a Dull and Dirty Limestone Tiled Floor

With Limestone, as well as other high-end stone like Marble and Travertine, we find that the best method for restoration is burnishing. This is a form of polishing which involves the sequential application of diamond encrusted pads of different grit levels.

We work with a system of four pads fitted to a buffing machine. The first is a Coarse pad, which grinds away the top layer of dirt and staining from the stone, along with any old sealer. I then moved through the system, applying each in turn the Medium, Fine, and Very Fine burnishing pads to gradually refine the polish on the floor. A small amount of water was used as lubricant between each pad, and I hoovered up any resulting slurry with a wet-vac machine.

Having finished polishing the stone, I paid attention to cleaning the grout lines, applying Tile Doctor Remove and Go, which draws out any ingrained stains and heavy grease build-up, and scrubbing it in with a specialised grout brush. The floor was then left to dry out completely overnight.

Sealing a Limestone Tiled Floor

Upon returning to the property the next day, I checked the floor was completely dry and quickly vacuumed up any leftover debris from the previous day’s work. Next, I gave the floor another polish with the Very Fine 3000 grit diamond burnishing pad, vacuumed it again, and it was then ready to be sealed.

Limestone Floor Sealing Cirencester

To do this I used Tile Doctor Colour Grow, which is an impregnating sealer that not only acts to protect the stone, but also intensify its natural colours. The floor was then left to dry for an hour, before I subsequently gave it one final dry polish using the Very Fine burnishing pa fitted to the buffing machine. After vacuuming up any debris, I applied a second coat of Colour Grow, left it to dry, and finally buffed it with a soft white pad.

Limestone Kitchen Floor After Polishing Cirencester

The customer was really pleased with the results, having never expected for the restoration to turn out so well. Undoubtedly there will a queue of prospective tenants hoping to see the property now that the Limestone tiled floor looks so great!

Limestone Bathroom Floor After Polishing Cirencester

 
 

Professional Tile Burnishing, Cleaning and Sealing for a Dirty and Stained Limestone Tiled Floor Restoration in Cirencester