gloucester

Old Victorian Red Quarry Tiled Kitchen Floor Restoration Gloucester

Original Quarry Tiled Floor Restored at a Victorian Property in Gloucester

This customer had purchased an older property in Gloucester and while fitting a new kitchen had the Ceramic tiled floor removed only to discover an original Quarry tiled floor underneath. Realising the value an original floor can add to a property as a period feature, they contacted Tile Doctor to see if it could be restored.

I made a visit to the property to survey the Quarry tiles and ascertain if it could be restored after being hidden for so long. I could see the tiles were in reasonable condition and it looked like they had tile adhesive on most of the tiles which I had experienced before. I was therefore confident that it would be possible to remove this and clean them up and they were reassured that I should be able to restore them to a good standard.

Old Victorian Red Quarry Tiled Kitchen Floor Before Restoration Gloucester Old Victorian Red Quarry Tiled Kitchen Floor During Restoration Gloucester

Happy with my quote and confident in my ability to get the job done I was booked in to complete the work.

Cleaning and Repairing a Victorian Red Quarry Tiled Kitchen Floor

With a date set to commence work I arrived on the agreed date to do the work and made a start on cleaning up the tiles. I soon realised at this point I had made a mistake by not completing a test clean when I came round to do the survey. As it turns out it wasn’t just tile adhesive on the quarry tiles but there was also a large section of concrete that I can only assume had been used to level the floor and fix the tiles.

I had no choice but to dig out the concrete and following that it would need replacing with self-levelling screed and replacement tiles. It took four painful days to remove the adhesive and rebuild the concreted section of flooring with replacement tiles.

Old Victorian Red Quarry Tiled Kitchen Floor During Restoration Gloucester

Once done I was able to move on and deep clean the tiles with a strong dilution of Tile Doctor Remove and Go scrubbed in with a black pad fitted to a rotary floor machine. The soiling was rinsed off with water and extracted with a wet vacuum and the whole process was then repeated until I was satisfied with that the quarry tiles were clean.

Old Victorian Red Quarry Tiled Kitchen Floor After Cleaning Gloucester Old Victorian Red Quarry Tiled Kitchen Floor After Cleaning Gloucester

Sealing a Victorian Red Quarry Tiled Kitchen Floor

I then left the floor to dry for 3 days and then return to seal with to a low satin finish using Tile Doctor Seal and Go Extra which works well on old Quarry tiles. Additionally it’s has a breathable formula which is important feature for an old floor like this one which won’t have a damp proof membrane fitted. Being breathable allows moisture to rise through the tile and evaporate at the surface.

Old Victorian Red Quarry Tiled Kitchen Floor After Restoration Gloucester Old Victorian Red Quarry Tiled Kitchen Floor After Restoration Gloucester

The customer was pleased with results despite the job taking 7 days, having only allowed 4 but the results were worth my hard work. Sometimes jobs do not go quite to plan, but as a Tile Doctor we are experienced at getting over any challenges we face.

For aftercare I recommended the use of Tile Doctor Neutral Tile Cleaner which is a pH neutral cleaner that will keep the floor in tip top condition for the future and will ensure maintenance of this lovely feature is easy for them.

 

Professional Restoration of a Victorian Red Quarry Tiled Kitchen in Gloucestershire

Original Quarry Tiled Floor Restored at a Victorian Property in Gloucester Read More »

Renovating a Flood Stained Terracotta Kitchen Floor in Gloucester

Earlier this year a customer from Gloucester got in touch with Tile Doctor through Home Services following a flood that had affected his Terracotta Kitchen floor. It’s difficult to tell from the pictures but the Terracotta floor was badly stained and marked following the flood, it now looked flat and dull and my customer wanted its appearance restored to the way it looked before.

Flood Stained Terracotta Floor Before Cleaning Gloucester

I visited site to survey the tiles a recommend a was way to improve the appearance of the floor. Although now completely dry the floor was not looking its best, but there was nothing we couldn’t remedy. To resolve, I recommended deep cleaning the floor, stripping off any dirt and what was left of old sealers and then applying a new sealer. I gave them a formal quote which they could pass on to their insurance company and a not long after we received a call to say they were able to go ahead with the work.

Deep Cleaning a Terracotta Tiled Kitchen Floor

My first job was to prepare the floor for cleaning by removing the kickboards under the kitchen units and sweeping away any grit. Next the floor was deep cleaned using a strong dilution of Tile Doctor Pro-Clean which was left to soak into the Terracotta tiles for ten minutes. This gives time for the Pro-Clean to get to work breaking down the old sealers and dirt trapped in the pores of the tile. The Pro-Clean was then scrubbed into the tile using a black buffing pad fitted to a rotary machine.

After scrubbing the floor soiled cleaning solution was rinsed away with water and extracted from the floor using a wet vacuum. The tiles were then inspected to see if more work was required, there were a few areas I was not happy with, so the process was repeated where needed.

I then turned my attention to the grout lines which were really ingrained with dirt. I cleaned these with Tile Doctor Remove and Go which is a stronger product that is really designed for removing stubborn sealers but is also a powerful cleaning agent in its own right. Again, I left the product to soak into the grout for ten minutes before scrubbing it by hand with a stiff brush to really get the grout clean.

After rinsing and extracting one more time the Terracotta and Grout were as clean as they could be, and I left the floor to dry off fully for four days. Terracotta is very porous, so it absorbs the water and takes longer to dry than other tiles.

Flood Stained Terracotta Floor After Cleaning Gloucester

Sealing a Terracotta Tiled Kitchen Floor

On my return I first checked the floor for moisture using a damp meter taking several readings around the floor to satisfy myself it was dry. Applying a sealer to a damp tile would lead to an inconsistent result so it’s always best to be sure.

Eight coats of sealer were needed to ensure the floor was fully sealed, again Terracotta is very porous, and it can really drink the sealer. For this floor I chose Tile Doctor Seal and Go which works really well on Terracotta it added a nice subtle shine to the tiles and will ensure the floor is protected going forward. It’s also water based so you don’t get a smell as it dries.

Flood Stained Terracotta Floor After Cleaning Sealing Gloucester

Afterwards the floor looked great and the customer was very happy. They are just hoping there will not be a repeat of the floods that caused the previous damage.

 

Professional Restoration of a Terracotta Tiled Kitchen in Gloucestershire

Renovating a Flood Stained Terracotta Kitchen Floor in Gloucester Read More »

Victorian Tiled Hallway Floor Before and After Restoration Nailsworth

Restoring a Victorian Tiled Hallway in Nailsworth

This Victorian tiled hallway floor at a property in Nailsworth needed repairs to four areas and then required a deep clean and seal. The client was unsure if this was something, we would be able to help with but after speaking to him on the phone and review the photographs he sent over I reassured him it should be possible.

Victorian Tiled Hallway Floor Before Renovation Nailsworth Victorian Tiled Hallway Floor Before Renovation Nailsworth

The owner was keen to progress to I arranged an appointment to visit the property and survey the floor to get a better idea of the issues and provide a price for fully restoring the floor to the best condition possible. As the pictures show the Victorian tiles looked dull and washed out, there were also white paint spots on the tiles. I was confident the floor could be saved, and the owner was happy with my quote, so we scheduled a date for the work to start.

Repairing and Cleaning and a Victorian Tiled Hallway Floor

I spent the first day repairing the floor which in most cases requires carefully lifting the old tiles, scraping out the adhesive and cement and then re-fixing the original tile or a replacement back in place. We are usually able to source replacement tiles, either reclaimed or reproduction and we had managed to find some to match this floor. It’s a slow process and with four areas of Victorian flooring in need of attention so this step took up much of the first day. The floor was left to dry overnight so the adhesive would set.

On the second day I deep cleaned the tiles with a 200-grit diamond pad fitted to a rotary buffer using water to lubricate. The resultant slurry was then extracted with a wet vacuum and the process was repeated with a 400-grit burnishing pad. All the edges were done with water and small handheld diamond blocks as the rotary machine was too large to reach the corners and edges.

To finish the cleaning I treated the tiles to an acid wash using Tile Doctor Grout Clean Up which as well as removing any old grout smears would neutralise any efflorescent salts contained within the floor which can be problem on old floors like this that don’t have a damp proof membrane installed. Another advantage of doing this is that you achieve a stronger bond between the sealer and the tile.

Sealing a Victorian Tiled Hallway Floor

The floor was left to dry for 3 days after which I returned to seal it. Before starting thought I took some moisture readings with the damp meter. Once I was satisfied, I started applying the first of what would be five coats of sealer and for this floor I chose Tile Doctor Seal and Go Extra. There were several reasons for choice including the satin finish however my main thought was the age of the floor which meant it would not have a damp-proof membrane installed so any moisture would need to rise through the tile without being impeded, Seal and Go extra allows for this.

Victorian Tiled Hallway Floor After Repair Nailsworth Victorian Tiled Hallway Floor After Repair Nailsworth

My customer was really pleased with the result and happy to have the floor restored back to its original state.

Victorian Tiled Hallway Floor After Renovation Nailsworth

 

Professional Restoration of a Victorian Tiled Hallway in the Cotswolds

Restoring a Victorian Tiled Hallway in Nailsworth Read More »

Victorian Hallway Before After Renovation Gloucester

Victorian Tiled Hallway Gloucester

My customer was renovating their house in Gloucester and discovered this lovely vibrant Victorian tiled floor with blue accents under the carpet and were keen to get it restored and back to its’ former self. Gloucester lies close to the Welsh border, on the River Severn, between the Cotswolds to the east and the Forest of Dean to the southwest.

Victorian Hallway Before Renovation Gloucester
They were delighted to uncover the original floor but unsure if it could be restored asked me to come over and take a look. The tiles were in good physical condition for their age but were ingrained with dirt and had paint splashes, cement and carpet glue on the surface. The property had lots of period features, but this was by far the nicest. Luckily there was very little damage to the floor, so there was no need to source any extra tiles. We discussed what needed to be done and how the process would work, agreed a price and a timescale for the project which was accepted.

Victorian Hallway Before Renovation Gloucester

Deep Cleaning a Victorian Tiled Hallway Floor

The first process was to cover walls and skirting boards with plastic sheeting, I usually do this as a rule but in this case the hallway had just been decorated so we wanted to avoid any dirty splashes from the cleaning process.

Next a solution of tile doctor Tile Doctor Remove and Go was applied to the floor and left to dwell for 20 minutes and then with a buffing machine and black scrubbing pad I set about deep cleaning the floor. Tile Doctor Remove and Go is a strong coatings remover that can deal with old sealers, paint and glue, it’s also safe to use on tile, grout and stone. The floor was then rinsed with water and the now soiled cleaning solution was extracted from the floor with a wet vacuum.

Stubborn stains were spot treated using the same process and once satisfied with the results I gave the floor an acid wash using Tile Doctor Acid Gel. This neutralises any potential salt staining issues that could appear later as the floor dries. This process is known as efflorescence and can be very troublesome on old floors like these which don’t have a damp proof membrane installed. We often find covering old floors like these in a rubber underlay also prevents the floor from breathing which can lead to damp being trapped in the floor.

Sealing a Victorian Tiled Hallway Floor

We left the floor to dry off overnight and then the next day checked for moisture. It’s been a long hot summer, so the tiles had soon dried out. Happy with the results we started sealing the tiles with five coats of Tile Doctor Seal and Go. This is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable low-sheen finish that works really well on Victorian tiled floors like this. Additionally, the product allows moisture vapour transmission so will be able to cope with the fact that this floor has not damp-proof membrane.

Victorian Hallway After Renovation Gloucester
As you can see from the photos the sealant left a lovely finish and the customer was very pleased with outcome. The floor is now restored and offers a lovely traditional entrance to their property.

Victorian Hallway After Renovation Gloucester
 

Professional Restoration of a Victorian Tiled Hallway in Gloucestershire

Victorian Tiled Hallway Gloucester Read More »

Terracotta Kitchen Floor Tiles in Bristol Before After Cleaning and Sealing

Stripping Varnish off Terracotta Kitchen Tiles and Resealing in Bristol

Terracotta tiles are always a popular choice for Kitchens but being made from clay they are porous and need to be sealed to prevent dirt from becoming ingrained in the tile. Once sealed though you need to remember Kitchens are high traffic areas, so you can expect the sealer to wear off quicker than it would elsewhere.

I mention this as a customer from Bristol asked me to do a survey on her Varnish Sealed Terracotta Kitchen Tiles where the seal had worn down and were now dull, and the grout had darkened. I surveyed the floor and completed a test clean on a section of the floor which came out well impressing the customer who was happy for me to proceed with cleaning and sealing the floor.

Terracotta Kitchen Floor Tiles in Bristol Before Cleaning Terracotta Kitchen Floor Tiles in Bristol Before Cleaning

Traditionally Terracotta tiled floors have been sealed with a number of products over the years including Wax, Linseed Oil and on this occasion Varnish however all these products have their disadvantages and don’t compare to modern sealers which are designed for the job.

Terracotta Kitchen Floor Tiles Bristol Before Cleaning

Cleaning a Dirty Terracotta Tiled Kitchen Floor

The first day was spent trying to get the Varnish off the floor which somebody had used on the floor as a sealer; Varnish is easily scratched by furniture, so I certainly wouldn’t recommend it. I worked out however that it could be scrubbed off once coated in a combination or Tile Doctor products Pro-Clean, Remove and Go and Nano-Tech HBU which would be left to soak in for a while and then softened with steam.

Mechanical assistance from a buffing machine fitted with a large black scrubbing pad helped reduce the amount of elbow grease that was required and once I was happy the tiles were clean the now soiled solution was rinsed off with water and extracted using a wet vacuum.

The next day and with the floor now clear I was able to see those areas that needed further re-treatment and also turn my attention to the grout which was cleaned using more cleaning solution worked in with a stiff narrow grout brush that gets into the grout lines. Once I was completely happy with the floor its was given a final rinse with water to remove any trace of cleaning products and then dried with a wet vacuum to remove as much moisture as possible.

Terracotta Kitchen Floor Tiles in Bristol After Cleaning

Sealing a Dirty Terracotta Tiled Kitchen Floor

It’s important that the tiles are dry before sealing so I left the floor to dry out for three days before returning to seal them. No Varnish this time of course, Tile Doctor has a range of sealers for every type of situation and what I find works best on Terracotta tiles is a single coat of Tile Doctor Colour Grow topped off with multiple coats of Tile Doctor Seal and Go.

Terracotta Kitchen Floor Tiles in Bristol During Cleaning
Tile Doctor Colour Grow is an impregnating sealer that penetrates into the pores of the clay protecting it from within whilst enhancing colour whilst Seal and Go completes the sealing process and adds a nice sheen to the look of the tile.

Terracotta Kitchen Floor Tiles in Bristol After Cleaning and Sealing Terracotta Kitchen Floor Tiles in Bristol After Cleaning and Sealing

As you can see from the final photographs the floor looked really good and the customer gave me top marks for feedback.

Terracotta Kitchen Floor Tiles in Bristol After Cleaning and Sealing
 

Professional Terracotta Tiled Kitchen Restoration in Gloucestershire

Stripping Varnish off Terracotta Kitchen Tiles and Resealing in Bristol Read More »

Slate tiled hallway floor Before After Cleaning Gloucester

Badly Maintained Slate Tiles Rejuvenated in Gloucester

This Slate tiled floor in the hallway of a property in Gloucester had been laid 28 years ago, but during this time had received no proper maintenance. The property owner used to clean the tiles once a week using a steam cleaner to little effect.

Slate tiled hallway floor Before Cleaning Gloucester
In fact, we don’t normally recommend steam cleaning sealed surfaces as it will erode the sealer prematurely. After countless years of steam cleaning, I was confident that any traces of old sealer on this floor would be non-existent at this point.

This is, of course, a problem because a lack of sealer exposes the stone to ingrained dirt and stains. The effects of this are shown in the photos below: as you can see, the Slate had completely lost its lustre and naturally colourful patina.

Slate tiled hallway floor Before Cleaning Gloucester
I was asked by the property owner to provide this Slate tiled hallway with the restoration that was so long overdue, so I travelled to the house in Gloucester, a city situated near the Welsh border and between the Cotswolds and the Forest of Dean.

Cleaning a Dirty Slate Tiled Hallway

I started the restoration by mixing a strong solution of Tile Doctor Remove and Go combined with Tile Doctor NanoTech HBU. These two products serve different purposes. Remove and Go is a stripper designed to break down any traces of old sealer that might still have existed, as well as any paints and adhesive markings; NanoTech HBU is a potent cleaner which contains nano-sized cleaning particles that penetrate deep into the stone to get underneath tough dirt and stains to dissolve and lift them out.

This cleaning solution was spread over the floor and left to dwell for 30 minutes, before being scrubbed in using a black scrubbing pad fitted to a buffing machine. A thick black slurry resulted from this process and this needed to be removed using a wet vacuum.

Slate tiled hallway floor During Cleaning Gloucester
Next, I repeated this cleaning process using Tile Doctor Pro Clean, our reliable alkaline cleaner, to provide a more thorough clean for the tiles and grout. The slurry was once again removed using a wet vacuum, before I then rinsed the whole floor with fresh water to remove any traces of chemicals.

When satisfied with outcome of the cleaning process, I left the floor to dry overnight.

Sealing a Slate Tiled Hallway

Upon arriving back at the property, the next day, I ran some quick moisture tests to check that the floor was dry. Thankfully, there were no damp issues and I was able to seal the tiles using four coats of Tile Doctor Seal and Go, leaving each coat to dry before applying the next.

Seal and Go is a water based sealer (so no smell as it dries) which adds durable stain resistance and a low-sheen finish that brings out the best in the slate.

Slate tiled hallway floor After Cleaning Gloucester
The customer’s reaction to the outcome of the restoration was fantastic. She never expected the floor to turn out so beautifully and was very pleased.

Slate tiled hallway floor After Cleaning Gloucester
 

Professional Restoration of an Unmaintained Slate Tiled Hallway in Gloucestershire

Badly Maintained Slate Tiles Rejuvenated in Gloucester Read More »

Old Flagstone Floor before and after Renovation in Minchinhampton

Old Flagstone Tiles Restored to New in Minchinhampton

Minchinhampton is an ancient market town located on a hilltop in the Cotswolds area of Gloucestershire, famous for being one of the UK’s areas of outstanding beauty. The town has a long history and many of the residents live in some truly picturesque and characterful cottages that date back to the 18th century and beyond.

I was recently contacted by a property owner in the village. She had just uncovered an original Flagstone tiled floor in her cottage, which dates to 1765. The floor had previously been covered by a wooden floor and the property owner was keen to see if I could restore it. We’ve had some fantastic success with restoring similar floors in the past, so I was more than happy to see what could be done.

I visited the property initially to conduct a test clean and check that I would be able to remove the copious wood adhesive left on the floor after the covering had been lifted. This test clean was successful, and the customer booked me in for complete the full restoration straight away.

Old Flagstone Floor Before Restoration at Minchinhampton Cottage

Cleaning a Dirty Flagstone Tiled Floor

My first action in the process of restoring the floor was to mix a strong solution of two products – Tile Doctor NanoTech HBU and Tile Doctor Remove and Go. Remove and Go is designed to strip away any old sealer on the floor and dissolve any adhesive and paint stains, while NanoTech HBU is a potent cleaner which uses nano-sized particles to penetrate deep into the stone and eliminate ingrained dirt.

This solution was applied across the floor and left to dwell for 40 minutes. Then, using a poly-brush fitted to a floor buffing machine, I cleaned the floor and in doing so removed 85 percent of the ingrained dirt. To tackle the rest of the ingrained dirt, I spot cleaned the stubborn area using Tile Doctor Acid Gel in combination with a handheld steamer. Acid Gel is a concentrated mix of phosphoric and hydrochloric acids.

I also used a handheld buffing machine fitted with a Coarse 100 grit diamond encrusted pad to grind away any outstanding dirt and level off the surface of the tiles. When I was satisfied with the results of the cleaning process, my next operation was to replace all the missing grout on the floor. I did this using a Limestone grout, which was a good colour match for the Flagstone.

Sealing a Flagstone Tiled Floor

With the first day of work complete, I left the floor to dry out for the next three days. With the floor being particularly old, it was important to give it a long period to dry to help avoid any damp issues.

Upon returning to the property, I ran some quick damp tests to check the floor could be sealed. When satisfied that there was no excess moisture to deal with, I proceeded to seal the floor with three coats of Tile Doctor Seal and Go, leaving 30 minutes to dry between coats. This will give the floor robust protection against ingrained dirt along with the high-quality satin finish the customer had requested.

Old Flagstone Floor Before Restoration at Minchinhampton Cottage
Seeing the result, the customer was really pleased with her floor. She had previously thought there was nothing that could be done to restore these old Flagstones, but with the right combination of products and cleaning methods I was able to achieve a fantastic restoration. Another satisfied customer.

Professional Tile Cleaning and Sealing for an Old Flagstone Tiled Floor Restoration in Minchinhampton

Old Flagstone Tiles Restored to New in Minchinhampton Read More »

Ceramic Tiled and Grout Before and After Cleaning in Gloucester

Ceramic Tiles and Grout Lines Rejuvenated in a Gloucester Hallway

Ceramic tiles are usually glazed and therefore non-porous, so when the floor starts to lose its appearance there’s a good chance the problem relates to the grout. This is because the top layer of the Cementous grout is rough and will attract a build-up of dirt over time.

Once dirt becomes ingrained into any porous surface, tile or grout, it isn’t easily removed using supermarket cleaning products. In fact, many standard cleaning products are acidic which can have a negative impact on many surfaces (always read the label before use).

I mention this as I was contacted about restoring a Ceramic tiled floor at a house in my local area of Gloucester. Interestingly the tiles as well as the grout lines had become badly soiled and discoloured, and the property owner was at a loss at how to get them clean.

Ceramic Tiled and Grout Before Cleaning in Gloucester Ceramic Tiled and Grout Before Cleaning in Gloucester

Deep Cleaning Ceramic Tile and Grout

The tiles were located in the hallway which is one of the busiest areas of any house and as a result had seen a lot of dirt being trampled in and now required a deep clean.

To get them clean I applied Tile Doctor Pro Clean, which is our reliable high alkaline cleaner. I used a strong dilution and let it soak into the Tile and Grout for a short period before scrubbing it in using a buffing machine fitted with a scrubbing pad. This helped to remove any initial layers of ingrained dirt:

Next, I applied Tile Doctor Remove and Go, which is designed to remove heavy instances of soil as well as old dealers, adhesives, and paint stains, to the grout lines. This was left to soak for 20 minutes and I then scrubbed the grout lines with a stiff grout brush.

When I was satisfied that all of the tiles and grout line was clean, I rinsed the floor with water which was extracted with a wet vacuum and then dried all grout lines with a heat gun.

Sealing a Ceramic Tiled Floor

The customer was concerned that the grout lines would darken again over time due to more ingrained dirt, so I recommended that they were sealed in order to protect them.

So, after checking the grout lines were dry a moisture meter, I sealed the grout lines using Tile Doctor Ultra Sealer applied with a pipette. The pipette ensures the sealer is delivered exactly where its needed. Ultra Seal is a solvent-based impregnating sealer designed to provide maximum protection against ingrained dirt and staining.

I should point out that Ceramic tiles are glazed and therefore won’t take a sealer. I think you will agree the floor look much better after a fresh clean and seal. Certainly, the customer was very happy and the hallway looks like new!

Ceramic Tiled and Grout After Cleaning in Gloucester Ceramic Tiled and Grout After Cleaning in Gloucester

 

Professional Grout Cleaning and Sealing in Gloucestershire

Ceramic Tiles and Grout Lines Rejuvenated in a Gloucester Hallway Read More »

Large Victorian Hallway Tewkesbury After Clean and Seal

Dirty Victorian Hallway Tiles Rejuvenated in Tewkesbury

Victorian tiles are very hard-wearing and historically a popular choice for heavy traffic areas such as hallways. Still popular today they are nonetheless like most tiles and can become ingrained with dirt over time.

This particular floor, located in a property in the old market town of Tewkesbury is a good example of a floor that was in good physical condition, but heavily ingrained with dirt due to a lack of regular maintenance. At a loss for how to remedy the situation by themselves, the property owner asked me to pay a visit to restore the tiles back to their best possible condition.

Large Victorian Hallway Tewkesbury Before Cleaning

Cleaning a Dirty Victorian Tiled Hallway Floor

In this particular scenario, I opted to mix and apply a solution of different cleaning products from our professional range, each serving a different purpose. These products were Tile Doctor Pro Clean, Tile Doctor Remove and Go, and Tile Doctor NanoTech HBU. Remove and Go serves the purpose of stripping away any old sealer on the tiles, while Pro Clean is an alkaline cleaner that reliably removes dirt and staining. NanoTech HBU is a particularly powerful cleaner which utilises nano-sized particles to penetrate deep into the pores of the stone, get underneath difficult stains and lift them out.

I spread this potent solution across the length and width of the tiled hallway and left it to soak for approximately 10 minutes, before using a black scrubbing pad fitted to my buffing machine to give the tiles a deep scrub. Next, I rinsed the soiled solution away and neutralised the chemicals with plain water, before extracting any residue using a wet vacuum. I repeated the cleaning process several times to achieve the best results possible, and I also employed the aid of a steam cleaner to spot clean any particularly stubborn marks.

Sealing a Dirty Victorian Tiled Hallway Floor

Cleaning the floor took two days in total. At the end of the second day, I gave the floor a thorough and final rinse before leaving it to dry completely overnight. The next day, I returned to the property to seal the floor after checking the floor was dry. Ensuring before sealing that the floor is completely dry is crucial – even the smallest quantity of moisture remaining can potentially cloud the sealer and damage its performance.

My choice of sealer was Tile Doctor Colour Grow, an impregnating sealer that penetrates and fills the pores of the tile to prevent trapped dirt and makes regular cleaning much easier. Colour Grow is a great choice of sealer for Victorian tiles because it really enhances the colourful patterns which are characteristic of this type of tile.
My customer was very impressed with the service and remarked on the huge improvement to the appearance of the floor. You can see this for yourself – just take a look at the before and after photos!

Large Victorian Hallway Tewkesbury After Clean and Seal
 

Professional Victorian Tiled Hallway Restoration in Gloucestershire

Dirty Victorian Hallway Tiles Rejuvenated in Tewkesbury Read More »

Quarry Tiled Porch Before and After Restoration in Moreton in Marsh

Heavily Stained Red Quarry Porch Tiles Cleaned and Sealed in Moreton-in-Marsh

A tiled entrance porch is a great asset to any property after all first impressions do count, but since this type of feature will experience heavy traffic, it can be particularly difficult to keep it clean.

This red Quarry tiled porch at the entrance to this house in the old town of Moreton-in-Marsh was in particularly bad condition and in desperate need of restoration. It appeared to me that some decoration work has taken place recently because the tiles were marked with all kinds of staining, including paint, cement and even glue.

Quarry Tiled Porch Before Cleaning in Moreton-in-Marsh
I was asked to deep clean the tiles, remove the staining and basically restore the appearance of the tiles back to their origianal condition.

Cleaning Stained Red Quarry Tiles

Due to the fact that the tiles were heavily soiled with paint and adhesives, I decided to clean them first using two of our most powerful cleaning products: Tile Doctor NanoTech HBU and Tile Doctor Remove and Go.

NanoTech HBU uses nano-sized cleaning particles to penetrate deep into difficult-to-reach areas of the stone and tackle ingrained dirt and staining. Remove and Go is specially designed to strip away paints and glues, as well as any old sealer on the tiles, combined together they produce a powerful tile cleaner.

Both products were applied across the tiled porch and left to dwell for 45 minutes. Next, I used a 17″ black scrubbing pad fitted to a buffing machine (on the main surface) and a 6″ pad fitted to a hand held buffing machine around the edges. This way I able to effectively get the products into the tiles and give them a deep clean. I repeated the process several times, rinsing with water in between and extracting the soil with a wet vacuum to ensure a deep and thorough clean.

Some stubborn paint and cement markings remained in places, and I resolved to spot clean these using more NanoTech HBU in combination with a handheld steamer.

Sealing Red Quarry Tiles

When I was happy with the cleaning results I rinsed and neutralised the floor with water. Given that it was only a small area of tiles I was able to dry them with a heat gun, leaving it ready to be sealed.

My choice of sealer was Tile Doctor Colour Grow, which was the perfect fit for these deep red Quarry tiles. Colour Grow not only seals the tiles, it also intensifies the natural shades in the stone to enhance the overall appearance of the feature. I applied four coats of the sealer to ensure the tiles will be protected and easy to keep clean for the long term.

Quarry Tiled Porch After Restoration in Moreton-in-Marsh
Both myself and the customer was very pleased with the transformation of the porch floor.

Professional Quarry Tiled Porch Floor Restoration in Gloucestershire

Heavily Stained Red Quarry Porch Tiles Cleaned and Sealed in Moreton-in-Marsh Read More »

African Slate Floor Before After Cleaning and Sealed in Mickleton

Dark African Slate Tiles Rejuvenated in Mickleton

African Slate has a striking realism to it and its natural mix of light and dark shades is difficult to compare to anything else. This example of an African Slate tiled floor was installed in the kitchen of a property in Mickleton, Gloucestershire, a town which is best known for its tradition of vegetable gardening.

African Slate Floor Before Cleaning in Mickleton
The floor was laid 15 years ago, but the owner had not maintained the sealer which would have protected the porous stone from dirt becoming ingrained. As a result, the floor was now in poor condition with the rich dark tones in the stone now dull, dirty and unremarkable. The owner had decided it was time to put it right so I was called in to make sure the tiles were restored to their original magnificence.

African Slate Floor Before Cleaning in Mickleton

Cleaning an African Slate Tiled Floor

My first job was to unclip the kickboards from the base of the kitchen units, and then also cover the units themselves with plastic to guard them against potential splashing from the cleaning process.

Next, to begin the process, I applied a solution of one part Tile Doctor Pro-Clean and three parts plain water. Pro Clean is a high alkaline cleaner which is so reliable when it comes to removing dirt that we use it on almost every job we do, from Slate and Quarry to Marble and Sandstone.

Once the product had been applied, I left it to soak into the stone for approximately fifteen minutes. Then, using my buffing machine fitted with a 17 inch black scrubbing pad, I scrubbed the solution into the stone to clean the floor, releasing the ingrained dirt and removing the stains in the process. All the subsequent cleaning slurry was vacuumed up with a wet vacuum and I rinsed the floor with plain water.

I repeated this process a couple of times to ensure the most thorough clean possible. Then once satisfied with the condition of the tiles, I turned my attention to the cleaning all the dirty grout lines, again using Pro-Clean. The main difference here was that I scrubbed the product in by hand using a special grout brush as opposed to using a buffing machine. The rinsing and vacuuming process was then carried out once again.

Sealing an African Slate Tiled Floor

Once the cleaning process had been completed, I covered the floor with dust sheets and left it to dry off overnight.

I returned to the property the next day to find the the floor dry and ready to be sealed. I proceeded to seal the tiles with four coats of Tile Doctor Seal and Go, leaving roughly 30 minutes between coats.

African Slate Floor After Cleaning and Sealing in Mickleton
Seal and Go is a robust sealer that works really well on floors like these and results in a durable low sheen finish that really emphasises the natural characteristics of the African Slate.

African Slate Floor After Cleaning and Sealing in Mickleton
The customer was absolutely delighted with the restored appearance of the floor. In fact, it reminded her of how it looked when it was first installed 15 years ago! A complete transformation in just two days.

Professional African Slate Tiled Floor Restoration in Gloucestershire

Dark African Slate Tiles Rejuvenated in Mickleton Read More »

Victorian Tiled Hallway Before After Cleaning and Repair in Gloucester

Victorian Hallway Tiles Restored Following Renovation Works in Gloucester

If you’ve even undertaken a property renovation, you’ll know that building works can take a very heavy toll on your floors if not properly protected. Not too long ago I was called to a house in Gloucester to see what could be done to restore the appearance of the tiles after the Victorian tiled hallway had been left in a sorry state following renovation work.

Victorian Tiled Hallway Before Cleaning and Repair in Gloucester
Upon arriving at the property, I also discovered that there was a row of tiles missing under one doorway. These would need to be replaced before any cleaning could take place. The renovation work had left very dirty and riddled with minerals salts and old grout smears.

Victorian Tiled Hallway Before Cleaning in Gloucester
If you have never been Gloucester it’s well worth a visit, dating back to the roman times it is in fact the country’s most inland port boasting some fantastic architecture include the historic docks and many period buildings.

Cleaning a Dirty Victorian Tiled Floor

Fortunately, I was quickly able to source matching replacements for the missing tiles to not disturb the original character of the floor. I took it upon myself to install these, fixing them in place and then grouting them.

While the grout on the new tiles was drying, I began the cleaning process using a strong solution of Tile Doctor Pro-Clean. This is a high alkaline cleaner which we use reliably on most types of natural stone, including Victorian, Quarry, Slate, and Sandstone. The product was mixed with a small amount of water, and the solution was worked into the tiles using a black scrubbing pad fitted to a heavy weight rotary machine. This dealt with most of the thick dirt and staining that had been left over by the builders.

The soiled cleaning solution was then rinsed away with water and extracted using a wet vacuum. After the first stage of cleaning, I washed the floor down with Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acid in gel form designed to remove any mineral salts and old grout smears.

Sealing a Victorian Tiled Floor

Once the cleaning process had been completed, I left the floor to dry overnight. Typically, it’s good to give a tiled floor at least 24 hours to dry in order to ensure no moisture was left over, because even the slightest quantity of moisture can cloud the sealer and damage its performance.

Victorian Tiled Hallway After Cleaning and Repair in Gloucester
Once satisfied that the floor was completely dry I applied one coat of Tile Doctor Colour Grow, which is an impregnating sealer designed to enhance the natural colours in the stone. I then waited an hour this sealer to cure before applying four coats of Tile Doctor Seal and Go which added the satin finish the customer had asked for.

Victorian Tiled Hallway After Cleaning and Repair in Gloucester
The combination of sealers will provide the protection the floor needs and the customer will find it much easier to keep it clean in the future. The result was great and the customer was very happy indeed.

Professional Victorian Tiled Floor Renovation in Gloucester

Victorian Hallway Tiles Restored Following Renovation Works in Gloucester Read More »

Limestone Tiled Lounge Floor After Cleaning in Vale Gloucestershire

Burnishing and Sealing Works Wonders for Limestone Tiles in Yate

Limestone is known on the international market for its premium toughness, durability and aesthetic characteristics. This can make it difficult to maintain however, especially if the stone has been polished and lustre on the stone has started to wear down which is inevitable with use.

The traditional method of getting a the shine back on polished stone is called honing which is expensive however at Tile Doctor we have worked out a much more affordable process called burnishing which utilises different grades of diamond encrusted pads to clean and then bring up the polish.

I recently undertook the restoration of a large area of Limestone tiles in the kitchen and lounge of a property in Yate, Gloucestershire. The floor as a while had become dull and dirty – and was long overdue some professional attention.

Limestone Tiled Lounge Floor Before Cleaning in Vale Gloucestershire

Burnishing a Limestone Tiled Floor

Before starting I removed the kick boards from the underneath the kitchen units so they wouldn’t get affected by the cleaning process. Once prepped I started the burnishing process which is a chemical free process that uses a small amount of water for lubrication and a quick rinse between the use of each pad. I started with the first of the four burnishing pads which is a coarse 400 grit pad that designed to grind away the dirt and old sealer on the surface of the floor.

After applying the first pad, I moved my way through the medium 800 and fine 1500 grit pads to gradually build up the shine. As the floor became cleaner it became apparent the grout lines were not in particularly good condition as well so I opted to clean these using a stiff grout brush and Tile Doctor Remove and Go which is specially formulated to remove old sealers whilst tackling dirt and stains.

After completing the clean and giving the floor a final rinse I extracted as much moisture from the floor as possible using a wet vacuum and left the tiles to dry off overnight.

Sealing a Limestone Tiled Floor

Returning to the property next day, I tested to check tiles were dry and then proceeded to buff the tiles once over using the last of the four pads which is a 3,000 grit burnishing pad that finished off the polishing process.

Finally, I applied two coats of Tile Doctor Ultra Seal, which is an impregnating dealer designed to provide maximum stain production with a natural look finish. I buffed further in between each coat to ensure the best possible polish was achieved.

Limestone Tiled Lounge Floor After Cleaning in Vale Gloucestershire
This was a tricky floor to photograph due to the sunlight streaming through the windows on both days but hopefully you can appreciate the difference as much as the customer can.

Professional Limestone Floor Polishing and Sealing in Gloucestershire

Burnishing and Sealing Works Wonders for Limestone Tiles in Yate Read More »

Bathroom Tiles Before and After Cleaning and Grout Sealing in Cheltenham

Ceramic Tiled Bathroom Refresh in Cheltenham

This Ceramic Tiled bathroom was at a house in the historic town of Cheltenham on the edge of the Cotswolds. As you can see from the photograph below the grout between the Ceramic tiles was very stained and had attracted black mould.

Bathroom Tiles Before Cleaning Cheltenham

Refreshing a Ceramic Tiles Bathroom

To get the tile and grout clean I sprayed on Tile Doctor Mould Away and left it to soak in for ten minutes before giving it a scrub with a stiff brush. The resultant slurry was rinsed off and then the process repeated once more.

The Mould Away made a difference to the tile and grout however the grout was still not 100% white, so I recommended applying a grout colourant which I was confident would have the desired effect.

Grout Colouring

Two coats of white Tile Doctor Grout Colourant were then applied; this product is basically painted on top of the existing grout with any excess wiped off the adjacent tile before it dries. It’s an epoxy based formula that becomes a long lasting barrier protecting the grout and also making it much easier to clean, it looks natural and I think you will agree it has made all the difference in fact the customer commented that it looks like a new bathroom.

Bathroom Tiles Before Cleaning Cheltenham
The job was completed in a day and I think you will agree the whole bath area now looks like a new installation.

Refreshing a ceramic tiled bathroom in Gloucestershire

Ceramic Tiled Bathroom Refresh in Cheltenham Read More »

Scroll to Top