Filton Tile Cleaning

This client who lives in Filton had been informed by the previous owner of his property that there was a Quarry tiled floor in the Kitchen but it had been covered up with stone effect Vinyl flooring. Keen to have it removed and have the original Quarry tiles brought back to life we were contacted to see if it could be done.

I visited the property to survey the floor and work out a plan for the restoration. The lino was heavily stuck in place with about 5mm of adhesive so I could see this was going to be no easy restoration. It would be necessary to remove, the floor, adhesive compound and cement beneath it.

I discussed the project with the client the project, explaining it was difficult to ascertain how long it would take but anticipated it would be around three days. The process would involve stripping off the Vinyl tiles, removing the adhesive, deep cleaning the Quarry tiles and the apply a sealer to protect them. The client agreed my quote and we arranged a convenient date to return to make a start.

Stripping Stone Effect Vinyl from a Quarry Tiled Kitchen Floor

After removing the kickboards from underneath, the kitchen units, and taping up the surrounding areas to protect them, I set about restoring the floor. I used a variety of different methods to remove the adhesive compound and cement but mainly hand tools and hard labour! After three long days we had managed to remove the Vinyl and one once all adhesive was removed it was starting to look like a Quarry tiled floor. It was actually quite rewarding to see the Quarry tiles emerge as we progressed.

Once the Quarry tiled floor was fully exposed, I applied Tile Doctor Acid Gel which was worked in using a large buffing machine fitted with a black scrubbing pad. The soil was rinsed off with water and the waste extracted with a wet vacuum. I repeated this procedure until I was satisfied the floor was as clear of old adhesives and residue and as clean as possible. Actually, we had uncovered a really nice-looking floor, which considering the covering was generally in good condition. The floor was left for a few days to ensure it was totally dry, ready for the sealing process.

Sealing a Quarry Tiled Kitchen Floor

We used a lot of water during the cleaning process, so I left the floor to try out for two days before returning to apply the sealer. I had chosen to use Tile Doctor Colour Grow for the sealer; it leaves a matt finish whilst intensifying the natural colours in the tile. It works by occupying the pores in the tile thus preventing dirt from becoming trapped resulting in durable protection. It also allows the surface to breathe which is important on a floor of this age. We applied 2 coats to the tiles allowing each to dry before applying the next, the lovely colours of the floor were now enhanced.

Our client was amazed at the results and so happy they were finally rid of the old lino which was passed its best. For aftercare I recommended they should use Tile Doctor Neutral Tile Cleaner which is designed for cleaning sealed tile and stone.

 

Professional Restoration of a Quarry Tiled Kitchen in Gloucestershire