Heavily Stained Red Quarry Porch Tiles Cleaned and Sealed in Moreton-in-Marsh

A tiled entrance porch is a great asset to any property after all first impressions do count, but since this type of feature will experience heavy traffic, it can be particularly difficult to keep it clean.

This red Quarry tiled porch at the entrance to this house in the old town of Moreton-in-Marsh was in particularly bad condition and in desperate need of restoration. It appeared to me that some decoration work has taken place recently because the tiles were marked with all kinds of staining, including paint, cement and even glue.

Quarry Tiled Porch Before Cleaning in Moreton-in-Marsh

I was asked to deep clean the tiles, remove the staining and basically restore the appearance of the tiles back to their origianal condition.

Cleaning Stained Red Quarry Tiles

Due to the fact that the tiles were heavily soiled with paint and adhesives, I decided to clean them first using two of our most powerful cleaning products: Tile Doctor NanoTech HBU and Tile Doctor Remove and Go.

NanoTech HBU uses nano-sized cleaning particles to penetrate deep into difficult-to-reach areas of the stone and tackle ingrained dirt and staining. Remove and Go is specially designed to strip away paints and glues, as well as any old sealer on the tiles, combined together they produce a powerful tile cleaner.

Both products were applied across the tiled porch and left to dwell for 45 minutes. Next, I used a 17″ black scrubbing pad fitted to a buffing machine (on the main surface) and a 6″ pad fitted to a hand held buffing machine around the edges. This way I able to effectively get the products into the tiles and give them a deep clean. I repeated the process several times, rinsing with water in between and extracting the soil with a wet vacuum to ensure a deep and thorough clean.

Some stubborn paint and cement markings remained in places, and I resolved to spot clean these using more NanoTech HBU in combination with a handheld steamer.

Sealing Red Quarry Tiles

When I was happy with the cleaning results I rinsed and neutralised the floor with water. Given that it was only a small area of tiles I was able to dry them with a heat gun, leaving it ready to be sealed.

My choice of sealer was Tile Doctor Colour Grow, which was the perfect fit for these deep red Quarry tiles. Colour Grow not only seals the tiles, it also intensifies the natural shades in the stone to enhance the overall appearance of the feature. I applied four coats of the sealer to ensure the tiles will be protected and easy to keep clean for the long term.

Quarry Tiled Porch After Restoration in Moreton-in-Marsh

Both myself and the customer was very pleased with the transformation of the porch floor.
 
 

Professional Quarry Tiled Porch Floor Restoration in Gloucestershire

Dark African Slate Tiles Rejuvenated in Mickleton

African Slate has a striking realism to it and its natural mix of light and dark shades is difficult to compare to anything else. This example of an African Slate tiled floor was installed in the kitchen of a property in Mickleton, Gloucestershire, a town which is best known for its tradition of vegetable gardening.

African Slate Floor Before Cleaning in Mickleton

The floor was laid 15 years ago, but the owner had not maintained the sealer which would have protected the porous stone from dirt becoming ingrained. As a result, the floor was now in poor condition with the rich dark tones in the stone now dull, dirty and unremarkable. The owner had decided it was time to put it right so I was called in to make sure the tiles were restored to their original magnificence.

African Slate Floor Before Cleaning in Mickleton

Cleaning an African Slate Tiled Floor

My first job was to unclip the kickboards from the base of the kitchen units, and then also cover the units themselves with plastic to guard them against potential splashing from the cleaning process.

Next, to begin the process, I applied a solution of one part Tile Doctor Pro-Clean and three parts plain water. Pro Clean is a high alkaline cleaner which is so reliable when it comes to removing dirt that we use it on almost every job we do, from Slate and Quarry to Marble and Sandstone.

Once the product had been applied, I left it to soak into the stone for approximately fifteen minutes. Then, using my buffing machine fitted with a 17 inch black scrubbing pad, I scrubbed the solution into the stone to clean the floor, releasing the ingrained dirt and removing the stains in the process. All the subsequent cleaning slurry was vacuumed up with a wet vacuum and I rinsed the floor with plain water.

I repeated this process a couple of times to ensure the most thorough clean possible. Then once satisfied with the condition of the tiles, I turned my attention to the cleaning all the dirty grout lines, again using Pro-Clean. The main difference here was that I scrubbed the product in by hand using a special grout brush as opposed to using a buffing machine. The rinsing and vacuuming process was then carried out once again.

Sealing an African Slate Tiled Floor

Once the cleaning process had been completed, I covered the floor with dust sheets and left it to dry off overnight.

I returned to the property the next day to find the the floor dry and ready to be sealed. I proceeded to seal the tiles with four coats of Tile Doctor Seal and Go, leaving roughly 30 minutes between coats.

African Slate Floor After Cleaning and Sealing in Mickleton

Seal and Go is a robust sealer that works really well on floors like these and results in a durable low sheen finish that really emphasises the natural characteristics of the African Slate.

African Slate Floor After Cleaning and Sealing in Mickleton

The customer was absolutely delighted with the restored appearance of the floor. In fact, it reminded her of how it looked when it was first installed 15 years ago! A complete transformation in just two days.
 
 

Professional African Slate Tiled Floor Restoration in Gloucestershire