Restoring Quarry Tiles Hidden Under Vinyl Flooring in Filton

This client who lives in Filton had been informed by the previous owner of his property that there was a Quarry tiled floor in the Kitchen but it had been covered up with stone effect Vinyl flooring. Keen to have it removed and have the original Quarry tiles brought back to life we were contacted to see if it could be done.

I visited the property to survey the floor and work out a plan for the restoration. The lino was heavily stuck in place with about 5mm of adhesive so I could see this was going to be no easy restoration. It would be necessary to remove, the floor, adhesive compound and cement beneath it.

Lino Covered Quarry Tiled Kitchen Floor Before Restoration in Filton Lino Covered Quarry Tiled Kitchen Floor Before Restoration in Filton

I discussed the project with the client the project, explaining it was difficult to ascertain how long it would take but anticipated it would be around three days. The process would involve stripping off the Vinyl tiles, removing the adhesive, deep cleaning the Quarry tiles and the apply a sealer to protect them. The client agreed my quote and we arranged a convenient date to return to make a start.

Stripping Stone Effect Vinyl from a Quarry Tiled Kitchen Floor

After removing the kickboards from underneath, the kitchen units, and taping up the surrounding areas to protect them, I set about restoring the floor. I used a variety of different methods to remove the adhesive compound and cement but mainly hand tools and hard labour! After three long days we had managed to remove the Vinyl and one once all adhesive was removed it was starting to look like a Quarry tiled floor. It was actually quite rewarding to see the Quarry tiles emerge as we progressed.

Lino Covered Quarry Tiled Kitchen Floor During Restoration in Filton Lino Covered Quarry Tiled Kitchen Floor During Restoration in Filton

Once the Quarry tiled floor was fully exposed, I applied Tile Doctor Acid Gel which was worked in using a large buffing machine fitted with a black scrubbing pad. The soil was rinsed off with water and the waste extracted with a wet vacuum. I repeated this procedure until I was satisfied the floor was as clear of old adhesives and residue and as clean as possible. Actually, we had uncovered a really nice-looking floor, which considering the covering was generally in good condition. The floor was left for a few days to ensure it was totally dry, ready for the sealing process.

Sealing a Quarry Tiled Kitchen Floor

We used a lot of water during the cleaning process, so I left the floor to try out for two days before returning to apply the sealer. I had chosen to use Tile Doctor Colour Grow for the sealer; it leaves a matt finish whilst intensifying the natural colours in the tile. It works by occupying the pores in the tile thus preventing dirt from becoming trapped resulting in durable protection. It also allows the surface to breathe which is important on a floor of this age. We applied 2 coats to the tiles allowing each to dry before applying the next, the lovely colours of the floor were now enhanced.

Lino Covered Quarry Tiled Kitchen Floor After Restoration in Filton Lino Covered Quarry Tiled Kitchen Floor After Restoration in Filton

Our client was amazed at the results and so happy they were finally rid of the old lino which was passed its best. For aftercare I recommended they should use Tile Doctor Neutral Tile Cleaner which is designed for cleaning sealed tile and stone.

 

Professional Restoration of a Quarry Tiled Kitchen in Gloucestershire

Poorly Maintained Kitchen Quarry Tiles Rejuvenated in Cheltenham

It’s often quite surprising what condition we find some tiles in when were asked to come out and survey the floor. Case in point being this Quarry tiled kitchen floor I was asked to look at by a customer in Cheltenham, which as you may know is particularly famous for its racecourse and the top-secret GCHQ.

Upon arrival at the property, I found that the floor was not in great condition. For some reason, it had been painted over with red tile paint and then covered with a wax coating which was easily scratched. To Make the situation worse, there were around 20 tiles in the floor with holes in them that had simply been filled with concrete.

Quarry Tiled Floor Cheltenham Before Removing Paint Quarry Tiled Floor Cheltenham Before Removing Paint

Clearly, the tiles had not been maintained properly in the past but fortunately the current owner of the property who was keen to have them restored had called in Tile Doctor and after a demonstration clean I was booked to come back and correct the numerous issues.

Cleaning a Damaged Quarry Tiled Kitchen Floor

On the first day of the restoration, I started by applying a solution of Tile Doctor Remove and Go across the entire floor and leaving the product to dwell for around 30 minutes. Remove and Go is a powerful stripper designed to loosen paint splashes, adhesive stains and many types of urethane and wax coatings so that they can be easily removed.

After leaving the product to dwell, I could use a handheld scrapper to simply remove the wax coating and layer of paint on the floor. This process took about half a day; during the second half of the day, I spent my time removing the damaged tiles and replacing them with new Quarry tiles that had been sourced to match nicely with the existing floor.

Quarry Tiled Floor Cheltenham During

On the second day, any stubborn paint splashes remaining were re-treated and I subsequently deep cleaned the floor using a strong dilution of Tile Doctor Pro-Clean. This strong alkaline cleaning product was worked into the tiles using a 17-inch scrubbing pad fitted to a specialised rotary machine. The resultant soil was extracted off the floor using a wet vacuum and given a rinse with water to neutralise the floor. The wet vacuum was used again to remove the water and extract as much moisture from the tiles as possible to improve the drying time.

Sealing a Quarry Tiled Kitchen Floor

Once the deep clean had been completed, I left the floor dry for two days to allow sufficient time for it to dry thoroughly. Upon returning to the property, I ran a damp test to see if the tiles were dry enough to be sealed. To my surprise, the floor recorded only around 4% moisture even though the property is relatively old and is unlikely to have a damp proof membrane installed.

Nonetheless, this meant I could seal the floor. I did this by using a single coat of our impregnating, colour-intensifying sealer known as Tile Doctor Colour Grow, followed by three coats of Tile Doctor Seal and Go, a water based sealer which provides a high-quality satin finish.

Quarry Tiled Floor Cheltenham After Cleaning and Sealing Quarry Tiled Floor Cheltenham After Cleaning and Sealing

The deep clean, combined with the application of two different sealers, really helped to give these Quarry tiles a new lease of life. The customer was very happy indeed – in fact, had this been an exam, I’m certain I would’ve received top marks and it was certainly a major improvement on how they were before.
 
 

Professional Restoration of a Quarry Tiled Kitchen Floor in Gloucestershire

Quarry Tiles From the 1850s Rejuvenated at a Church in Tewkesbury

Tewkesbury, the town and civil parish in Gloucestershire, is famous for the Tewkesbury Abbey, a Norman abbey church dating back to the 7th century so it has a lot of history and some very old buildings. Although not one of the oldest buildings in the town I was recently called to a small church in Tewksbury to restore the Quarry tiled entrance way dating back to the 1850s. The tiles had become very heavily ingrained with pigeon droppings, paint, cement, and general dirt over the years – and they were well past due for some professional attention.

Old Quarry Tiled Church Steps Before Cleaning Tewkesbury

Deep Cleaning Dirty Quarry Tiled Steps

My first job was to scrape away all the excess pigeon droppings and paint that could be removed by hand. Once the floor was clear, I was able to cover it with a strong solution of two of our cleaning products: Tile Doctor Remove and Go and Tile Doctor NanoTech HBU. While the cleaners are similarly powerful, they serve slightly different purposes.

Remove and Go is specially designed to strip away any old sealers, synthetic finishes, adhesives, cements, and paints. It also helps to draw old ingrained stains and remove heavy grease build-up. NanoTech HBU on the other hand is a penetrating cleaner designed to work where other cleaners won’t. It does this by utilizing nano-sized particles to reach underneath tough stains, dissolve them, and lift them out. Both products are suitable for use on polished and unpolished natural stone, including Limestone, Marble, Slate, Travertine and, of course, Quarry.

The cleaning solution was left to dwell for 45 minutes and then scrubbed into the tiles using a black pad fitted to a buffing machine. I then repeated this process with the same products to clean the grout lines. When I was happy with the overall cleanliness of the tiles, I spot cleaned some particularly stubborn stains using a steam cleaner in combination with a handheld scraper and some more NanoTech HBU.

Old Quarry Tiled Church Steps During Cleaning Tewkesbury

Sealing a Quarry Tiled Entrance Way

After finishing the cleaning process, I left the tiles to dry for two days. The tiles needed a good amount of time to dry completely because the old tiles don’t have the reasonably modern benefit of a damp-proof membrane.

Upon my return to the church I checked for any damp issues, and when satisfied that there weren’t any to deal with, I proceeded to seal the tiles using four coats of Tile Doctor Colour Grow. This is an impregnating sealer that enhances the natural colours in the Quarry tiles and provides the natural look, matte finish that the proprietor of the church had requested.

As you can see from the photo below, the result of the restoration was transformational. Needless to say, the parishioners will be very happy with the rejuvenated entrance way and, thanks to a highly durable sealant, the steps will be protected for the long term.

Old Quarry Tiled Church Steps During Cleaning Tewkesbury

 
 

Church Step Restoration in Gloucestershire

Heavily Stained Red Quarry Porch Tiles Cleaned and Sealed in Moreton-in-Marsh

A tiled entrance porch is a great asset to any property after all first impressions do count, but since this type of feature will experience heavy traffic, it can be particularly difficult to keep it clean.

This red Quarry tiled porch at the entrance to this house in the old town of Moreton-in-Marsh was in particularly bad condition and in desperate need of restoration. It appeared to me that some decoration work has taken place recently because the tiles were marked with all kinds of staining, including paint, cement and even glue.

Quarry Tiled Porch Before Cleaning in Moreton-in-Marsh

I was asked to deep clean the tiles, remove the staining and basically restore the appearance of the tiles back to their origianal condition.

Cleaning Stained Red Quarry Tiles

Due to the fact that the tiles were heavily soiled with paint and adhesives, I decided to clean them first using two of our most powerful cleaning products: Tile Doctor NanoTech HBU and Tile Doctor Remove and Go.

NanoTech HBU uses nano-sized cleaning particles to penetrate deep into difficult-to-reach areas of the stone and tackle ingrained dirt and staining. Remove and Go is specially designed to strip away paints and glues, as well as any old sealer on the tiles, combined together they produce a powerful tile cleaner.

Both products were applied across the tiled porch and left to dwell for 45 minutes. Next, I used a 17″ black scrubbing pad fitted to a buffing machine (on the main surface) and a 6″ pad fitted to a hand held buffing machine around the edges. This way I able to effectively get the products into the tiles and give them a deep clean. I repeated the process several times, rinsing with water in between and extracting the soil with a wet vacuum to ensure a deep and thorough clean.

Some stubborn paint and cement markings remained in places, and I resolved to spot clean these using more NanoTech HBU in combination with a handheld steamer.

Sealing Red Quarry Tiles

When I was happy with the cleaning results I rinsed and neutralised the floor with water. Given that it was only a small area of tiles I was able to dry them with a heat gun, leaving it ready to be sealed.

My choice of sealer was Tile Doctor Colour Grow, which was the perfect fit for these deep red Quarry tiles. Colour Grow not only seals the tiles, it also intensifies the natural shades in the stone to enhance the overall appearance of the feature. I applied four coats of the sealer to ensure the tiles will be protected and easy to keep clean for the long term.

Quarry Tiled Porch After Restoration in Moreton-in-Marsh

Both myself and the customer was very pleased with the transformation of the porch floor.
 
 

Professional Quarry Tiled Porch Floor Restoration in Gloucestershire