Victorian Tiled Hallway Gloucester

My customer was renovating their house in Gloucester and discovered this lovely vibrant Victorian tiled floor with blue accents under the carpet and were keen to get it restored and back to its’ former self. Gloucester lies close to the Welsh border, on the River Severn, between the Cotswolds to the east and the Forest of Dean to the southwest.

Victorian Hallway Before Renovation Gloucester

They were delighted to uncover the original floor but unsure if it could be restored asked me to come over and take a look. The tiles were in good physical condition for their age but were ingrained with dirt and had paint splashes, cement and carpet glue on the surface. The property had lots of period features, but this was by far the nicest. Luckily there was very little damage to the floor, so there was no need to source any extra tiles. We discussed what needed to be done and how the process would work, agreed a price and a timescale for the project which was accepted.

Victorian Hallway Before Renovation Gloucester

Deep Cleaning a Victorian Tiled Hallway Floor

The first process was to cover walls and skirting boards with plastic sheeting, I usually do this as a rule but in this case the hallway had just been decorated so we wanted to avoid any dirty splashes from the cleaning process.

Next a solution of tile doctor Tile Doctor Remove and Go was applied to the floor and left to dwell for 20 minutes and then with a buffing machine and black scrubbing pad I set about deep cleaning the floor. Tile Doctor Remove and Go is a strong coatings remover that can deal with old sealers, paint and glue, it’s also safe to use on tile, grout and stone. The floor was then rinsed with water and the now soiled cleaning solution was extracted from the floor with a wet vacuum.

Stubborn stains were spot treated using the same process and once satisfied with the results I gave the floor an acid wash using Tile Doctor Acid Gel. This neutralises any potential salt staining issues that could appear later as the floor dries. This process is known as efflorescence and can be very troublesome on old floors like these which don’t have a damp proof membrane installed. We often find covering old floors like these in a rubber underlay also prevents the floor from breathing which can lead to damp being trapped in the floor.

Sealing a Victorian Tiled Hallway Floor

We left the floor to dry off overnight and then the next day checked for moisture. It’s been a long hot summer, so the tiles had soon dried out. Happy with the results we started sealing the tiles with five coats of Tile Doctor Seal and Go. This is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable low-sheen finish that works really well on Victorian tiled floors like this. Additionally, the product allows moisture vapour transmission so will be able to cope with the fact that this floor has not damp-proof membrane.

Victorian Hallway After Renovation Gloucester

As you can see from the photos the sealant left a lovely finish and the customer was very pleased with outcome. The floor is now restored and offers a lovely traditional entrance to their property.

Victorian Hallway After Renovation Gloucester

 

Professional Restoration of a Victorian Tiled Hallway in Gloucestershire

Original Victorian Tiled Hallway Repaired, Cleaned and Sealed in Cheltenham

Cheltenham in the county of in Gloucestershire is a recognised area of outstanding beauty, and is known for its various festivals which take place throughout the year. Horse racing is another event that continues to be very popular in Cheltenham, after first gaining popularity during the Victorian period.

Indeed, lots of people made their homes in the town during this time, and many of the original Victorian properties are still in use to today, complete with original Victorian tiled floors. However, not all of these floors have been kept in great condition over the decades. Lots of them have spent years covered by carpet, while others have become broken or damaged, and simply left to slowly degrade over time.

I found a good example of this at the home of a recent customer of mine. The customer’s Victorian tiled hallway was in poor condition, with some of the tiles around the doorway cracked and in need of replacements. All in all, the floor required repairs, followed by deep clean and a fresh application of sealant.

Victorian Tiles Before Repair Clean and Seal Cheltenham Victorian Tiles Before Repair Clean and Seal Cheltenham

Repairing and Cleaning Original Victorian Tiles

My first job was to source suitable replacement tiles which would be needed to match with the original pattern of the floor. Fortunately Tile Doctor has built up a network of contacts in this area so this proved to be a simple enough task.

When I arrived on site I protected the flooring in the adjacent rooms and staircase carpet with plastic sheeting and made a start on removing the cracked tiles, cleaning up the foundation then fixing and grouting in the replacement tiles.

Victorian Tiles During Repair Cheltenham

Next, I moved on to cleaning the entire hallway starting with an application of Tile Doctor Pro-Clean, an alkaline-based product that is safe to use on Tile and Stone including Victorian tile, for the removal of heavy soil and staining. It can strip away old sealants remaining on the tile which is important to avoid a patchy looking result. The product was diluted with water and applied liberally across the area and left to dwell for roughly 10 minutes before I proceeded to work it into the tiles using a scrubbing pad fitted to a rotary machine.

I used a wet vacuum to remove the soiled cleaning solution, rinsed with water and then spot treated those tiles which needed more work to get them clean.

Once I was happy with the floor was as clean as it could be I left it to dry off overnight.

Sealing Original Victorian Tiles

Upon returning to the property the next day, my first concern was to run some tests to check for any outstanding damp issues. Victorian properties do not typically have damp proof membranes installed, so these tests were essential as an excess of moisture can cloud the sealant and prevent it from performing correctly.

Luckily, there were no major damp issues and I could proceed with sealing the tiles using Tile Doctor Colour Grow, which is an impregnating sealant that penetrates into the pores of the tile enhancing the natural colours and protecting it from with. I find many customers with Victorian Tiles opt for Colour Grow as their sealant because it provides a natural-look matte finish which really compliments the classic characteristics of Victorian tiles.

The customer was absolutely delighted with the outcome of the restoration, which you can see in the photo below. Best of all, he said that he is already getting comments from friends and family on how great the floor looks now.

Victorian Tiles After Repair Clean and Seal Cheltenham Victorian Tiles After Repair Clean and Seal Cheltenham

 
 

Professional Renovation of an Original Victorian Tiled Hallway in Gloucestershire

Dirty Victorian Hallway Tiles Rejuvenated in Tewkesbury

Victorian tiles are very hard-wearing and historically a popular choice for heavy traffic areas such as hallways. Still popular today they are nonetheless like most tiles and can become ingrained with dirt over time.

This particular floor, located in a property in the old market town of Tewkesbury is a good example of a floor that was in good physical condition, but heavily ingrained with dirt due to a lack of regular maintenance. At a loss for how to remedy the situation by themselves, the property owner asked me to pay a visit to restore the tiles back to their best possible condition.

Large Victorian Hallway Tewkesbury Before Cleaning

Cleaning a Dirty Victorian Tiled Hallway Floor

In this particular scenario, I opted to mix and apply a solution of different cleaning products from our professional range, each serving a different purpose. These products were Tile Doctor Pro Clean, Tile Doctor Remove and Go, and Tile Doctor NanoTech HBU. Remove and Go serves the purpose of stripping away any old sealer on the tiles, while Pro Clean is an alkaline cleaner that reliably removes dirt and staining. NanoTech HBU is a particularly powerful cleaner which utilises nano-sized particles to penetrate deep into the pores of the stone, get underneath difficult stains and lift them out.

I spread this potent solution across the length and width of the tiled hallway and left it to soak for approximately 10 minutes, before using a black scrubbing pad fitted to my buffing machine to give the tiles a deep scrub. Next, I rinsed the soiled solution away and neutralised the chemicals with plain water, before extracting any residue using a wet vacuum. I repeated the cleaning process several times to achieve the best results possible, and I also employed the aid of a steam cleaner to spot clean any particularly stubborn marks.

Sealing a Dirty Victorian Tiled Hallway Floor

Cleaning the floor took two days in total. At the end of the second day, I gave the floor a thorough and final rinse before leaving it to dry completely overnight. The next day, I returned to the property to seal the floor after checking the floor was dry. Ensuring before sealing that the floor is completely dry is crucial – even the smallest quantity of moisture remaining can potentially cloud the sealer and damage its performance.

My choice of sealer was Tile Doctor Colour Grow, an impregnating sealer that penetrates and fills the pores of the tile to prevent trapped dirt and makes regular cleaning much easier. Colour Grow is a great choice of sealer for Victorian tiles because it really enhances the colourful patterns which are characteristic of this type of tile.
My customer was very impressed with the service and remarked on the huge improvement to the appearance of the floor. You can see this for yourself – just take a look at the before and after photos!

Large Victorian Hallway Tewkesbury After Clean and Seal

 
 

Professional Victorian Tiled Hallway Restoration in Gloucestershire

Victorian Hallway Tiles Restored Following Renovation Works in Gloucester

If you’ve even undertaken a property renovation, you’ll know that building works can take a very heavy toll on your floors if not properly protected. Not too long ago I was called to a house in Gloucester to see what could be done to restore the appearance of the tiles after the Victorian tiled hallway had been left in a sorry state following renovation work.

Victorian Tiled Hallway Before Cleaning and Repair in Gloucester

Upon arriving at the property, I also discovered that there was a row of tiles missing under one doorway. These would need to be replaced before any cleaning could take place. The renovation work had left very dirty and riddled with minerals salts and old grout smears.

Victorian Tiled Hallway Before Cleaning in Gloucester

If you have never been Gloucester it’s well worth a visit, dating back to the roman times it is in fact the country’s most inland port boasting some fantastic architecture include the historic docks and many period buildings.

Cleaning a Dirty Victorian Tiled Floor

Fortunately, I was quickly able to source matching replacements for the missing tiles to not disturb the original character of the floor. I took it upon myself to install these, fixing them in place and then grouting them.

While the grout on the new tiles was drying, I began the cleaning process using a strong solution of Tile Doctor Pro-Clean. This is a high alkaline cleaner which we use reliably on most types of natural stone, including Victorian, Quarry, Slate, and Sandstone. The product was mixed with a small amount of water, and the solution was worked into the tiles using a black scrubbing pad fitted to a heavy weight rotary machine. This dealt with most of the thick dirt and staining that had been left over by the builders.

The soiled cleaning solution was then rinsed away with water and extracted using a wet vacuum. After the first stage of cleaning, I washed the floor down with Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acid in gel form designed to remove any mineral salts and old grout smears.

Sealing a Victorian Tiled Floor

Once the cleaning process had been completed, I left the floor to dry overnight. Typically, it’s good to give a tiled floor at least 24 hours to dry in order to ensure no moisture was left over, because even the slightest quantity of moisture can cloud the sealer and damage its performance.

Victorian Tiled Hallway After Cleaning and Repair in Gloucester

Once satisfied that the floor was completely dry I applied one coat of Tile Doctor Colour Grow, which is an impregnating sealer designed to enhance the natural colours in the stone. I then waited an hour this sealer to cure before applying four coats of Tile Doctor Seal and Go which added the satin finish the customer had asked for.

Victorian Tiled Hallway After Cleaning and Repair in Gloucester

The combination of sealers will provide the protection the floor needs and the customer will find it much easier to keep it clean in the future. The result was great and the customer was very happy indeed.
 
 

Professional Victorian Tiled Floor Renovation in Gloucester